Skip to main content

Logistics term paper III


A#2, Part 3
Comptroller Tom Dollar is a big “fan” of what was once a popular term --- MBWA (management by walking around). 
            As you are sitting at your desk enjoying a cup of coffee, who should walk in but Tom Dollar.
            Salutations, good to see you. 
Tom comments “Just the [man][woman][person] I wanted to see.  I just finished a meeting with the CEO.  
Mrs. Ennis commented that in the staff meetings we have been talking a lot about supply chains and supply chain management.  
She did some reading over the weekend and came away convinced that an important topic is the ability (or inability) to integrate the various aspects of the supply chain.
At the next staff meeting she would like a 10 to 15 minute or so presentation on supply chain integration.
She is relatively open to the content; but thinks that we should cover at least:
            ** 3-1 Purpose of the presentation.
            ** 3-2 Definition or explanation of what supply chain integration is.
            ** 3-3 Strategies that might be used. 
** 3-4 Considerations to help an organization identify an appropriate strategy.
** 3-5 Likely impact of factors such as the availability of the Internet for ordering; managing; etc.
** 3-6 Items that you think should be included if-you-ruled-the-world.
** 3-7 Conclusion(s) /recommendation(s)
[100 points per each suggested topic above.  100 points for any topics that you add.
 Reminder that there are other graded elements not specifically listed.]
            Mrs. Ennis also commented that this is NOT a decision briefing for LUML to decide on a strategy.  Rather, it is meant to be background before we start a longer-term analysis to help LUML better integrate its supply chain.  {Assuming that we can do a significantly better job; but that is a future analysis.}

            LUML has done minimal work in describing its supply chain.  The current managers “know how it works” because it has been developed piecemeal as LUML grew.  If you do have some information that can be applied in the briefing, then use it.  If you need to be more general, then be more general.
            The slides themselves should be balanced.  On the one hand, not just the words “Supply Chain Integration” and assert that the rest of the detail would be covered orally.  On the other hand, each slide should not have extensive narrative.  Enough detail for the content to be accurate and relatively complete. 
            If you wish to make a partial narrative that is ok.  But the intent is NOT for you to write a SPEECH on the topic!
            One general rule is up to two minutes per slide.  So, we are not talking scads-and-scads of slides.
            Do not forget the other grading factors (e.g., references).

Comments

  1. https://www.chegg.com/homework-help/questions-and-answers/cantilever-beam-subject-point-load-end-supposed-effect-normal-shearing-stresses-analyze-to-q65965766

    ReplyDelete

Post a Comment

Popular posts from this blog

Question: prove by induction 2^2 + 4^2 + 6^2 + ... + (2n)^2 = (2n)(2n+1)(2n+2)/6 ANSWER we will use induction on n base case : n=1 we have, 2^2 = 2*3*4/6 = 4 which is true inductive hypothesis let it be true for n = k i.e.,  2^2 + 4^2 + ... + (2k)^2 =   [(2k)(2k+1)(2k+2)]/6 inductive case let n = k+1 then we have 2^2 + 4^2 + .... + (2k)^2 + (2(k+1))^2 =   [(2k)(2k+1)(2k+2)]/6 + (2k+2)^2 =(2k+2)*[(2k)(2k+1)/6 + (2k+2)] =(2k+2)*[ (4k^2+2k)/6 + (12k + 12)/6 ] =(2k+2)*[ (4k^2+14k+12)/6 ] = =(2k+2)*[(2k)(2k+1)/6 + (2k+2)] =(2k+2)*[ (4k^2+2k)/6 + (12k + 12)/6 ] =(2k+2)*[ (4k^2+14k+12)/6 ] = (2k+2)*[ (4k^2 + 8k + 6k + 12)/6 ] = (2k+2)*[ (4k(k + 2) +6(k+2))/6 ] = (2k+2)*[ (4k+6)(k+2)/6 ] =  (2k+2)*[ 2 (2k+3)(k+2)/6  ] =   (2k+2)*[  (2k+3)*2*(k+2)/6  ] =   (2k+2)*[  (2k+3)(2k+4)/6  ] = [(2*(k+1))(2*(k+1)+1)(2*(k+1)+2)]/6 replacing k+1 by m, we get replacing k+1 by m, we get [(2*m)(2*m+1)(2*m+2)]/6 this completes our proof b...
Question: Q1 a. Sketch the static characteristics of a diode. (6 marks) b. An AC voltage source V drives a transformer with centre tap second indin gs connected to two rectifiers is shown in the following diagram. The load has constant current Io. Assume that when the diode conducts the forward voltage drop is Ve d V Vmsnot. The turns ratio is N: 1:1. Sketch the current waveform through one of the diodes. (6 marks) c. Write down an equation for efficiency of a power converter in terms of output power and converter losses (2 marks) d. Given the following parameters, calculate the efficiency of the power converter. Va = 310 V ω-2π50 forward voltage drop of the diodes VF = 0.7 V Transformer turns ratio = 10: 1 : 1 load current = 10 A Assume that the transformer has no loss and converter losses come from the diodes only. Also assume the diode voltage drop does not change with current. State your assumption if there is any 6 marks) ANSWER

Freelance Writing

We have top rated writers to help you with your assignments... Get your assignments/orders done. Work Types Essay Article Argumentive essay Coursework Dissertation Thesis Editing Proofreading Case study Lab report Problem-solving Multiple-choice questions Powerpoint presentation Critical thinking Short story Assignment Speaker notes 1-page summary Poster Speech Referencing styles APA MLA Chicago Harvard Vancouver Oxford CSE Others How to post the question/problem?? Comment/Mail : Subject Academic level (High-school/Undergraduate/Postgraduate/Master/PhD/....) Style (APA/MLA/Harvard/..........) Language (English US/UK) Order type (essay/thesis/lab report/...........) Number of pages and sources required Deadline Number of pages Compensation that you are ready to offer